返回首页| +15253134653
    壁挂炉产品推荐
新闻动态当前位置:首页-济南壁挂炉安装方法简析
济南壁挂炉安装方法简析
2014-10-9 13:36:55

1.将家用锅炉挂板固定在确定的墙面上,用膨胀螺丝或胀管螺丝将上托架挂板固定住。
1. The domestic boilers peg board mounted on the wall determined by expansion screws or expanding screws on the bracket peg board in place.


2.打烟囱出口的墙孔,根据模板上圆孔所示按向下2°的坡度丈量后在墙上钻孔。
2. dozen chimney wall outlet hole, the hole according to the template shown by measuring the downward slope of 2 ° to the wall after drilling.
 

3.挂机,将家用锅炉挂在上托架的挂钩上,并左右调整至正确位置。
3. hook, hanging on the domestic boilers hook bracket, adjust and around to the correct position.

4.安装烟囱:挂机前先将不锈钢同轴弯头安装到家用锅炉上,根据烟道出口方向调整弯头的方向,使弯头固定在正确位置,然后将烟囱插入烟囱口,挂上锅炉后,插上烟管,仔细调整高低位置,核实烟管与水平的夹角为2度。
4.Before hanging up after the first stainless steel coaxial elbow installed on domestic boilers, adjusted in accordance with the flue outlet elbow direction, so that the elbow is fixed in the correct position, and then insert the chimney chimney, hung boiler: 4 install chimney , plug in the cigarette tube, carefully adjust the height position to verify the smoke pipe and horizontal angle of 2 degrees.

5.与采暖系统及热水系统的管路连接,按要求连接采暖及卫生热水系统的管路。
5. with the heating system and hot water system piping connections required to connect piping for heating and sanitary hot water systems.

6.采暖回水管必须安装加药装置和过滤器,严禁使用斜Y型铜制或不锈钢制过滤器,应使用磁化过滤器,过滤器必须水平贴地安装。
6. heating return pipe must be installed dosing devices and filters, prohibited the use of Y-type copper or stainless steel filter, you should use magnetized filter, the filter must be affixed to the installation level.

 

济南壁挂炉http://www.jnccnt.cn/

 

此站带排名出售
联系手机:15253134653
联系QQ号:347299818
联系微信:扫描下图二维码