返回首页| +15253134653
    壁挂炉产品推荐
新闻动态当前位置:首页-济南壁挂炉不出热水的原因探讨
济南壁挂炉不出热水的原因探讨
2014-10-4 15:22:05
济南壁挂炉采暖正常但不出热水,检测的时候并没有其他异常,那么导致壁挂炉采暖正常不出热水的原因有哪些呢?
 
1、在采暖正常的情况下打开热水水龙头,发现控制面板上的运行灯没有亮,或者出来的水是凉水,这样的状况是因为热水水流的开关故障或者是采暖水流的开关故障所导致的,这时需要更换热水水流开关即可解决。
Open Under normal circumstances heating hot water faucet, found running lights on the control panel does not light, or out of the water is cold, this situation is because the hot water flow switch failure or heating water flow switch failure caused, then the need to replace the hot water flow switch can be solved.
2、打开壁挂炉热水水龙头的时候,指示灯亮了,但是热水不出来。出现这样的情况首先用手去触摸采暖管的表面,看是否有温度,如果是温热的,就是三通阀问题,那么需要打开机箱更换三通阀即可解决。
Open the boiler when the hot water faucet, lights, but the hot water does not come out. Such a situation first hand to touch the surface of the heating tube to see if there are temperature, if it is warm, the problem is the three-way valve, then you need to open the case to replace the three-way valve can be solved.
3、在板换没有进行热交换的情况下,用手去触摸板换的两面,如果出现一面烫,另一面凉的情况下,那么就是板换坏了,需要更换。
In the case of the board for no heat exchange traded hand to the touchpad on both sides, if there is one side hot, cool under the other side of the case, then it is the board for bad and need replacing.
4、如果是在第一次开启壁挂炉试用的时候出不来热水,那么很有可能是自来水和壁挂炉的热水接头接反了,需要拆卸掉重新安装接口即可解决。
If this is the first time when the trial opened to get out of hot water boiler, it is likely that the hot water tap and boiler fittings reversed, you need to take off the re-install interface can be solved.
5、无冷水流出,则为冷水阀门未开,开启阀门,仍无水流出,则为管路堵塞或水龙头过滤网堵塞,水龙头可自行清理,但管路堵塞应由专业人员清理。
No cold water outflow, compared with cold water valve is not open, open the valve, still no water out, compared with pipe blockage or faucet filter is clogged, the faucet can be self-cleaning, but the pipeline clogged by professional cleaning.
 
   

济南壁挂炉http://www.jnccnt.cn/

此站带排名出售
联系手机:15253134653
联系QQ号:347299818
联系微信:扫描下图二维码